D- 96-13: Import Requirements for Plants with Novel Traits, including Transgenic Plants and their Viable Plant Parts
This page is part of the Guidance Document Repository (GDR).
Looking for related documents?
Search for related documents in the Guidance Document Repository
Effective Date: July 26, 2010
This directive outlines the requirements for the importation into Canada of all plants with novel traits (PNTs) including transgenic plants and viable plant parts derived from them, such as fruit, tubers, seed and grain.
The current revision clarifies the import permit requirements for plants with novel traits (PNTs). A number of definitions were also updated.
Table of Contents
- Amendment Record
- Definitions, Abbreviations and Acronyms
- 1.0 General Requirements
- 2.0 Specific Requirements
- 3.0 Non-compliance
This directive will be reviewed every 5 years unless otherwise needed. For further information or clarification regarding the content of the directive, please contact the Plant Biosafety Office of the Canadian Food Inspection Agency (CFIA)
Approved by: Chief Plant Health Officer
Amendments to this directive will be dated and distributed as outlined in the distribution below.
- Directive mail list (Regions, PHRA, USDA)
- Provincial Government, Industry (determined by Author)
- National Industry Organizations (determined by Author)
Transgenic plants and other plants with novel traits (PNTs) including viable plant parts derived from them such as fruit, tubers, seed and grains are subject to the import requirements outlined in this directive. The import of a PNT into Canada will require an import permit issued under section 43 of the Plant Protection Regulations, if the PNT's plant pest potential has not yet been assessed by the CFIA.
Requirements of an import permit will include maintenance of the PNT in conditions of containment until such time as a release from containment is authorized by the Director of the CFIA's Field Crop Division, e.g. in a confined research field trial or an unconfined environmental release.
PNTs may also be subject to commodity-specific phytosanitary requirements. These phytosanitary conditions are applied to prevent the entry and spread of pests in Canada and apply regardless of whether the imported product is a PNT. Figure 1 illustrates how commodity-specific phytosanitary and PNT-specific phytosanitary requirements are applied to an import permit request.
For more information on determining if a non-transgenic plant is a PNT, please see directive 2009-09: Plants with novel traits regulated under Part V of the Seeds Regulations: Guidelines for determining when to notify the CFIA.
For more information on import requirements for PNTs, contact the PBO of the CFIA.
This directive is intended for use by importers, the Canadian Food Inspection Agency (CFIA), the Canada Border Services Agency (CBSA), other government departments and the public. This directive outlines the Canadian import requirements for PNTs.
This directive supersedes D-96-13 (1st Revision).
Definitions, Abbreviations and Acronyms
Definitions for terms used in the present document can be found in the Plant Health Glossary of Terms.
1.0 General Requirements
1.1 Legislative Authority
The Plant Protection Act, S.C. 1990, c. 22
The Plant Protection Regulations, SOR/95-212
Canadian Food Inspection Agency Fees Notice, Canada Gazette: Part I (as amended from time to time)
Seeds Act, R.S., 1985 c. s.-8
Seeds Regulations, Part V, C.R.C., c. 1400
The CFIA is charging fees in accordance with the Canadian Food Inspection Agency Fees Notice. For information regarding fees associated with imported product, please contact the National Import Service Centre (NISC). Anyone requiring other information regarding fees may contact any local CFIA office or visit our Fees Notice Web Site.
1.3 Regulated Commodities
PNTs, transgenic plants (including transgenic cut flowers) and viable plant parts derived from them such as fruits, tubers, seed and grain, are regulated commodities under the Plant Protection Act. For the purposes of this document, PNTs, transgenic plants and/or viable plant parts derived from them will be referred to inclusively as PNTs.
The import of any viable transgenic seed or plants intended for environmental release will require an import permit in accordance with this directive, and will also trigger regulation under Part V of the Seeds Regulations
1.4 Exempt Commodities
Although other phytosanitary requirements may still apply, PNT-specific import requirements do not apply to commodities conforming to the following exemptions:
1.4.1 PNTs authorized for unconfined release in Canada
PNTs that have been authorized for unconfined release into the Canadian environment under Part V of the Seeds Regulations have already undergone a safety assessment that includes an evaluation of their plant pest potential.
Please visit the CFIA website for a list of PNTs that have been authorized for unconfined release in Canada.
1.4.2 Plants derived from those PNTs authorized for unconfined release
Plants that are further developed from, and are considered substantially equivalent to, PNTs identified in exemption 1.4.1, are also exempted from PNT-specific import requirements provided that the intended use is similar, the plants do not contain any additional novel traits, and have not been subject to interspecific breeding.
Stacks of previously authorized single events are also exempted from PNT-specific import requirements. For more information on the regulatory requirements for stacks please see section 2.5.5.
1.4.3 Non-viable PNTs
PNTs that are incapable of sexual or asexual propagation, i.e., have been processed in some way to render them non-viable, such as by grinding or freezing (e.g. freeze-dried leaves), are exempted from PNT-specific import requirements.
1.4.4 Stand-alone DNA or RNA preparations
DNA or RNA preparations free of (not in or associated with) any living host organisms.
1.4.5 Select taxa of transgenic cut flowers
Transgenic cut flowers specifically of the taxa:
- Chrysanthemum x morifolium,
- Dianthus caryophyllus,
- Dendranthema spp.,
- Gerbera hybrida,
- Lilium spp.,
- Rosa spp., and
- Tulipa spp.
Those not intended for environmental release (i.e. are not intended for propagation, field cultivation, or other planting outdoors), are exempted from the requirements of this directive.
Importers should note the following:
- Any phytosanitary measures which apply to non-transgenic cut flowers would also apply to transgenic cut flowers. Importers are advised to contact their local CFIA Import Service Centre for more information or utilize the Automated Import Reference System (AIRS) of the CFIA.
- The intentional planting or propagation of transgenic cut flowers such that they persist or spread in the Canadian environment requires prior authorization under Part V of the Seeds Regulations.
1.5 Regulated Areas
2.0 Specific Requirements
2.1 Import Requirements for PNTs
Importation into Canada of all PNTs that have not been previously authorized for unconfined release into the Canadian environment under the Seeds Act and V of the Seeds Regulations require a permit issued under Section 43 of the Plant Protection Act and Plant Protection Regulations. See Figure 1: Relationship between PNT-specific import requirements and commodity-specific phytosanitary requirements for import.
Due to the presence of a novel trait, all PNTs are considered to pose a potential pest risk to the Canadian environment. As such, PNT-specific phytosanitary requirements are applied to all PNTs until the PNT's plant pest potential has been assessed by the CFIA.
2.1.1 Application for an import permit
Importers must complete an Application for Permit to Import Plants and Other Things under the Plant Protection Act (CFIA/ACIA 5256), which can be obtained from any local CFIA office. For guidance on how to apply for a Permit to Import, information requirements, including the issuance and amending of Permits to Import or the Plant Protection Regulations, please see the directive D-97-04: Application, procedures, issuance and use of a Permit to Import under the Plant Protection Act.
2.1.2 Additional information required for the evaluation of PNTs
Please note that the information requirements for the evaluation of PNTs are in addition to those listed in the directive D-97-04. When completing an application form, the description of the material must be complete. The description fields of the application form must include as much of the following information as is available. If the information is unknown, this should be explicitly stated. If the information is too large for the form to accommodate, please attach the remainder of the information as a separate document (e.g. construct map).
- the scientific name (genus and species) and common names
- the type of material (e.g. seeds, plants, tubers, etc.).
Note: an application may include more than one type of material, if the material comes from the same country of origin
- a clear description of the novel traits and genetic modifications
- the construct/plasmid name
- a map of the construct/plasmid including description of genes and their sources must be provided for the first submission. This information may be referenced in subsequent submissions
- OECD Unique Identifier and the transformation event (a name or designation associated with the specific PNT)
- the intended end use (e.g. research in a contained facility, confined field release, for processing, etc.)
- Permit numbers of permits previously issued for the same PNT or event
Applicants should note that certain information which is provided to the CFIA for the purposes of issuing an import permit may be protected under the provisions of the Access to Information Act or Privacy Act. For example, confidential business information, which may include information on specific constructs and events under development, may be exempt from disclosure pursuant to section 20(1) of the Access to Information Act. For additional information on access to information and privacy, please contact the CFIA.
2.2 Other Phytosanitary Requirements
All PNTs, like their conventional counterparts, could serve as vectors for the introduction of plant pests such as molluscs, insects, or pathogens into Canada. Therefore, all imported PNTs are subject to the same phytosanitary requirements as their conventional counterparts.
Please note that all material entering Canada is subject to inspection or audit by CFIA inspectors.
2.3 Inspection of Receiving Facilities
Before an import permit is issued, facilities intended to receive PNTs may be inspected by a CFIA inspector to confirm that the importer will be able to comply with import permit conditions.
2.4 Inspection for Compliance with Permit Condition
After importation, facilities where imported PNTs are contained may be inspected to determine whether the importer is in compliance with import permit conditions.
2.5 Other Regulatory Requirements
PNTs that are imported into Canada may be subject to other regulations depending on the intended use. Please note that the list below is not exhaustive. The importer has the responsibility to determine that they have met all other regulatory requirements before and after import.
2.5.1 Environmental Release
PNTs imported into Canada must be maintained in contained facilities unless release into the environment is authorized by the CFIA.
For additional information regarding applications for confined environmental release, please see the directive 2000-07: Conducting Confined Research Field Trials of Plant with Novel Traits in Canada.
For additional information regarding applications for unconfined release, please see directive 94-08: Assessment Criteria for Determining Environmental Safety of Plants with Novel Traits.
2.5.2 Food Use
Depending on the end use of the imported materials, requirements may apply under Health Canada legislation (Food and Drugs Act or Pest Control Products Act).
2.5.3 Feed Use
Depending on the end use of the imported materials, requirements may apply under legislation related to animal feed (Feeds Act or Health of Animals Act).
2.5.4 Commercial Processing Use
Products of biotechnology imported for commercial processing, i.e. not for planting, may also be subject to Environment Canada/Health Canada legislation (New Substances Notification Regulations (Organisms) under the Canadian Environmental Protection Act).
2.5.5 Environmental Release of Stacks
Release into the environment of stacks (such as planting) requires authorization under the Part V of the Seeds Regulations.
For more information on the regulatory requirements for stacks please refer to directive 94-08: Assessment Criteria for Determining Environmental Safety of Plants with Novel Traits and directive 2000-07: Conducting Confined Research Field Trials of Plant with Novel Traits in Canada.
Shipments that do not meet the import requirements described in this directive will be refused entry, returned to origin, or destroyed, at the expense of the importer. The importer is responsible for any and all costs relating to treatment, disposal, and removal or re-routing, including costs incurred by the CFIA to monitor the action taken. Violations of the Plant Protection Act and Regulations may be assessed according to Administrative Monetary Penalties.
Report a problem or mistake on this page
- Date modified: