ARCHIVED - List of Products Exempt from Evaluation by CFIA
This page has been archived
Information identified as archived is provided for reference, research or record-keeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.
This page is part of the Guidance Document Repository (GDR).
Looking for related documents?
Search for related documents in the Guidance Document Repository
The following products may be used in federally registered food establishments as long as the labels of the products bear the required information for non-food chemicals. In addition, CFIA inspection staff must be satisfied that the use of these products will not directly or indirectly contaminate food products during either their application or storage.
Every label shall show the following basic information:
- the name and address of the firm manufacturing or distributing the product. The address may be that of the head office of the firm;
- the descriptive name of the product. This is required prominently, immediately adjacent to the brand name, to denote the function and include a statement on the specific intended use in food plants;
- a list of major ingredients. If there is an active ingredients list on the label and the other major ingredients in the product, are non-active, they should be declared under a separate heading such as contains or ingredients...;
- direction for use, including any precautionary statements necessary to avoid contamination of food, such as potable water rinse, where applicable;
- net content statement; and
- where applicable, the words "Product of...." indicating the country of origin. The statement should be placed below the descriptive name of the products.
- Packaging materials used in the packaging of either pre-packaged food products or used in conjunction with a CFIA accepted plastic liner are exempt from evaluation and acceptance by the CFIA, provided that their use are in keeping with B.23.001, Division 23 of the Food and Drug Regulations (Food Packaging Materials) which reads "No person shall sell any food in a package that may yield to it's contents any substance that may be injurious to the health of a consumer of the food".
- Printing inks and adhesives used on the exterior surface of packaging materials such as shipping containers are exempt, provided that the packaging materials on which they are applied ensures an adequate functional barrier which precludes any migration of the chemical components of the inks/adhesives, to either the food or food contact surfaces and that their use will not contravene Division 23 of the Food and Drug Regulations.
- Pesticide products for outdoor use, such as herbicides must bear a Pest Control Product (PCP) registration number on the label and be used in keeping with label instructions to preclude direct or indirect contamination of food products. They are not, under any circumstances, to be used in or around outside food handling areas unless it is specified as such on the label and registered by the PMRA;
- Products used in offices or similar non processing areas, products such as furniture polishes and upholstering and rug shampoos or cleaners;
- Products used in washrooms, cafeterias and lunch rooms such as rinse additives, hand washing soaps or detergents, paper towels and facial tissues, as well as tarnish removers and bowl cleaners which are not intended to be used in processing areas;
- Hand Tools for Cleaning and Food Contact Applications. These items were originally exempted from review under Chapter 2, Section 2.7.5, item (f), of "The Meat Hygiene Manual of Procedures". However this Section has been deleted from the manual. Therefore it is the inspector in charge responsibility to decide if the proposed tool is acceptable for use in food plants;
- Products used in heating systems such as fuel additives, fire-box or flue treatments or cleaners;
- Products used in laboratories such as water testing chemicals, laboratory equipment, test kits, reactives or sampling materials etc.
- Products for outdoor use for sewage or waste water systems such as grease solvents for external traps or lines, odour control compounds in lagoons or holding ponds;
- Products used in cooling towers or evaporator condensers such as corrosion inhibitors and cleaning compounds (algaecides and biocides must bear PCP registration number);
- Products used for the cleaning or maintenance of the exterior of vehicles such as car washes or shampoos, combustion engine cleaners, parts cleaner used in the maintenance areas, tire cleaners and body brighteners;
- Products used for fire protection and security. These should be installed or used in a manner that they do not present a sanitary maintenance problem.
Exemptions for Working Apparel & First Aid Items for use in Food Plants:
- Protective clothing used in food processing plants by clean-up and maintenance personnel, when performing duties in a food handling areas;
- Hair nets/ bouffants, head, hearing, eye and face protection & non food contact working gloves, with the understanding that they are maintained in a hygienic condition and used in keeping with GMPs;
- First Aid Items (band aides, bandages, etc.) with the understanding that all precautionary controls are to be taken to preclude direct contact with food products or accidentally being incorporated into a food product.
- Date modified: